Micro Air - Dust and Particles | Extraction and Filtration

Micro Air's RP4-2, 8 cartridge collector ducted for source capture of cement dust generated during bagging and palletizing operations.

Processes involving thermal spray produce a very fine dust, typically sub micron in size. Micro Air dust collectors, configured for thermal spray applications effectively remove the harmful contaminants, and supply a clean, safe work environment. Micro Air's network of factory-trained Engineered Systems Distributors are experts in the field and are ready to assist in configuring your dust collection system for any process or application.

The RP8-3, 24 cartridge collector with a top-mounted blower, is located outdoors and due to the high efficiency of the system, the clean, conditioned air is returned back into the plant, rather than simply exhausting conditioned air to the outside, saving energy dollars.

Micro Air's RPO8, 8 cartridge dust collector collects nuisance dust generated in the fabrication & polishing of stone monuments. Prior to installing the collection system, visibility in the work area was greatly hindered, and tools and machinery were covered with dust. Installation of the collection system has greatly improved visibility, providing a much better working environment well within OSHA limits for nuisance dust, and has reduced equipment maintenance and downtime.

Dual Clean Air Booth Power Modules installed in end of railcars create effective blast booth.

Wood dusts generated from woodworking processes are a problematic aspect of housekeeping and can be real health hazards. OSHA has set a standard at 5 mg/m3 for respirable dust and 15 mg/m3 for total dust. Whether for a small school wood shop or a full cabinet or furniture manufacturer, Micro Air® can provide OSHA/NFPA compliant collection solutions to every wood-related application.

MX1800 with wrap around pre-filter in ambient air collection system. This unit is ideal in auto body shops and wood shops where generation points are found throughout the shop.

Micro Air dust collectors have proven to work very well in paper scrap applications, carton production, packaging processes, or any processes that create paper dust issues. Contact Micro Air for assistance in sizing the collection system for your particular application.

HYDROMAX WC5000 wet collector effectively captures explosive dust particulate utilizing the optional downdraft table ducted to the collector. This innovative new system handles even the most combustible dust, including aluminum and titanium while providing compliance to OSHA/NFPA combustible dust regulations.

A Wichita manufacturer that produces composite assemblies for the aviation industry called on Micro Air for the solution to their process dust issues, requiring improved air quality in their facility and reduced housekeeping clean-up time. The volume of dust and particulate generated in their grinding, routing and sanding processes was heavy. Micro Air suggested a turnkey solution with high levels of filtration and very low maintenance required, providing XA34 downdraft tables for work on smaller components and a Micro Air CAB, Clean Air Booth for the routing work done on larger components. The customer is impressed with the suction velocity generated on both pieces of equipment, and with their dust problems solved have recommended similar systems to their vendors and customers.