FRP8-7 equipped with inlet and outlet chemical isolation and explosion vents for OSHA Combustible Dust Compliance
FRP8-7 equipped with inlet and outlet chemical isolation and explosion vents for OSHA Combustible Dust Compliance
RP2 - The collector of choice when your requirements are for a small portable collector.
RP2 - The collector of choice when your requirements are for a small portable collector.
Large Tier 1 automotive supplier with 120 robotic welders is kept clean, and free of hazardous weld smoke and fumes utilizing 22 each RP8-2, 16 cartridge collectors, installed on mezzanine over robotic weld cells.
Large Tier 1 automotive supplier with 120 robotic welders is kept clean, and free of hazardous weld smoke and fumes utilizing 22 each RP8-2, 16 cartridge collectors, installed on mezzanine over robotic weld cells.
MICRO AIR FRP8 ducted to two large robotic weld hoods.  Each hood is equipped with an electric duct damper that opens only when weld station is in use.
MICRO AIR FRP8 ducted to two large robotic weld hoods. Each hood is equipped with an electric duct damper that opens only when weld station is in use.
Micro Air® RP1 Twisters ducted to four grinding stations capture dust and particulate, providing clean, safe breathing zones and shop floor.
Micro Air® RP1 Twisters ducted to four grinding stations capture dust and particulate, providing clean, safe breathing zones and shop floor.
RP12-5 ducted to fifteen robotic weld cells in an automotive parts facility.
RP12-5 ducted to fifteen robotic weld cells in an automotive parts facility.
RP6-3 with dual SA4000H spark arrestors on laser cutting process
RP6-3 with dual SA4000H spark arrestors on laser cutting process
MICRO AIR FORCE FRP8-3 equipped with custom legs to accommodate 7 ft x 7 ft roll-in dump cart captures fine, fibrous wood particulate in woodworking shop.
MICRO AIR FORCE FRP8-3 equipped with custom legs to accommodate 7 ft x 7 ft roll-in dump cart captures fine, fibrous wood particulate in woodworking shop.
Micro Air Logo

Dust Collection Systems

Force FRP Dust Collector Brochure

RP Dust Collector Brochure

Micro Air® dust collectors are engineered from the ground up with innovative design, and features that provide what counts most in a dust collector: functionality. From fine dust to coarse particulate, we can help make your plant a cleaner and a more friendly work environment.

Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 32 cartridge models. Modular design provides ability to bank units together for virtually an unlimited number of cartridges. All are designed to meet OSHA / NFPA and Industrial Ventilation Standards and are sized and rated for the proper air-to-cloth ratio to solve clean air issues in a wide variety of applications such as weld smoke, powder dust, sanding dust, shot-blast dust, grinding dust, paper dust, etc.

Key to our models is a revolutionary new cleaning system called Roto-Pulse®. This is an on line system that continually cleans the filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate incrementally inside the cartridge. While rotating, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside length of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle.

Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include:

Roto-Pulse® Cleaning
Provides a much more efficient cleaning cycle for increased air flow and longer cartridge life.

Gravity Flow Design
Dirty air always flows across the filters from top to bottom utilizing the natural downward force of gravity to get the particles to the filtration.

Compact Design
A small footprint of only 42" x 48" allows Micro Air® dust collectors to be located in virtually any area.

Easy Maintenance and Installation
All electrical and air connections are outside the cabinet for easy installation and maintenance.

After-Pulse is Standard
Micro Air® provides an after-pulse cleaning cycle in addition to automatic on-line cleaning. This allows the unit to pulse the cartridges after power is shut off for an effective cleaning at the end of a shift.

Complete Single-Source System Design
We can design and provide a complete dust control system including the collector and the ductwork to solve your particular problem. This is your assurance of the best possible total system supplied from a single source.

In addition to our standard features, the model RP dust collectors have a broad range of options including explosion vents, backblast dampers, HEPA after-filters, spark arrestors, Intelli-Touch energy savings controls, low profile options, a variety of different cartridges, and weather proof kits.

All Micro Air® dust collectors are sold and serviced by a national network of factory trained Engineered Systems Distributors. In addition, our direct factory support includes design consultation, CAD drawings and technical support, all at no charge to the end user.

All Micro Air® dust collectors are equipped with our proprietary Roto-Pulse® cartridge cleaning system, providing for increased efficiencies and extended filter life. Roto-Pulse Cartridge Cleaning System
Micro Air's Roto-Pulse® Cartridge Cleaning System cleans the entire surface area of the cartridge, uses less compressed air to do so, and is a markedly quieter cleaning system Roto-Pulse Cartridge Cleaning System Micro Air® revolutionary Roto-Pulse® Cartridge Cleaning system extends filter life by cleaning the entire length of the cartridge, while using less compressed air than traditional reverse-pulse cleaning systems.
Micor Air Logo

Dust Collection Systems

Force FRP Dust Collector Brochure

RP Dust Collector Brochure

Micro Air® dust collectors are engineered from the ground up with innovative design, and features that provide what counts most in a dust collector: functionality. From fine dust to coarse particulate, we can help make your plant a cleaner and a more friendly work environment.

Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 32 cartridge models. Modular design provides ability to bank units together for virtually an unlimited number of cartridges. All are designed to meet OSHA / NFPA and Industrial Ventilation Standards and are sized and rated for the proper air-to-cloth ratio to solve clean air issues in a wide variety of applications such as weld smoke, powder dust, sanding dust, shot-blast dust, grinding dust, paper dust, etc.

Key to our models is a revolutionary new cleaning system called Roto-Pulse®. This is an on line system that continually cleans the filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate incrementally inside the cartridge. While rotating, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside length of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle.

Micro Air® dust collectors are designed and manufactured with standard features that set them apart from the competition. These include:

Roto-Pulse® Cleaning
Provides a much more efficient cleaning cycle for increased air flow and longer cartridge life.

Gravity Flow Design
Dirty air always flows across the filters from top to bottom utilizing the natural downward force of gravity to get the particles to the filtration.

Compact Design
A small footprint of only 42" x 48" allows Micro Air® dust collectors to be located in virtually any area.

Easy Maintenance and Installation
All electrical and air connections are outside the cabinet for easy installation and maintenance.

After-Pulse is Standard
Micro Air® provides an after-pulse cleaning cycle in addition to automatic on-line cleaning. This allows the unit to pulse the cartridges after power is shut off for an effective cleaning at the end of a shift.

Complete Single-Source System Design
We can design and provide a complete dust control system including the collector and the ductwork to solve your particular problem. This is your assurance of the best possible total system supplied from a single source.

In addition to our standard features, the model RP dust collectors have a broad range of options including explosion vents, backblast dampers, HEPA after-filters, spark arrestors, Intelli-Touch energy savings controls, low profile options, a variety of different cartridges, and weather proof kits.

All Micro Air® dust collectors are sold and serviced by a national network of factory trained Engineered Systems Distributors. In addition, our direct factory support includes design consultation, CAD drawings and technical support, all at no charge to the end user.



Request More Information Micro Air's exclusive Roto-Pulse® cartridge cleaning system provides for extended filter life with the best cleaning system on the market.  Watch the Video. Browse Micro Air's Full Line Brochure for data on Micro Air's complete line of air cleaning equipment. Micro Air Cartridge Options and Specifications Micro Air's Full Line Brochure - Spanish Version See how Intelli-Touch Energy Savings Controls can save you money on your energy bills. Micro Air You Tube Channel Micro Air Twitter Micro Air LinkedIN Micro Air Facebook

2009 S West St, Wichita, KS 67213 - PH: (866) 566-4276